About the Journal

Journal of Mechanical Engineering Research and Developments (ISSN: 1024-1752) is an international peer-reviewed, electronic, academic journal. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Mechanical Engineering and Technology. The Journal welcomes contributions that promote the exchange of ideas and rational discourse between practicing educators and mechanical researchers all over the world. Original theoretical work and application-based studies, which contributes to a better understanding of Mechanical Engineering and technological challenges, are encouraged.

Aims and Scope

The scopes of the journal include, but are not limited to, the following topics:

• Thermal Engineering and Fluids Engineering

• Mechanics

• Kinematics, Dynamics, & Control of Mechanical Systems

• Mechatronics, Robotics and Automation

• Design, Manufacturing, & Product Development

• Human and Machine Haptics

• Engineering Management and Industrial Economy

Specific topics of interest include: Advanced Manufacturing Technology, Analysis and Decision of Industry & Manufacturing System, Applied Mechanics, Biomechanics, CAD/CAM Integration Technology, Complex Curve Design, Manufacturing & Application, Computational Mechanics, Computer-aided Geometric Design & Simulation, Fluid Dynamics, Fluid Mechanics, General mechanics, Geomechanics, Industrial Application of CAD, Machinery and Machine Design, Machine Vision and Learning, Material Science and Processing, Mechanical Power Engineering, Mechatronics and Robotics, Artificial Intelligence, PC Guided Design and Manufacture, Precision Manufacturing & Measurement, Precision Mechanics, Production Technology, Quality & Reliability Engineering, Renewable Energy Technologies, Science and Engineering Computing, Solid Mechanics, Structural Dynamics, System Dynamics and Simulation, Systems Science and Systems Engineering, Vehicle Dynamic Performance Simulation, Virtual-tech Based System & Process-simulation, etc.

Editorial Board

Editor in Chief

Distinguished Prof. T M Indra Mahlia
Faculty of Engineering and Information Technology,
University of Technology Sydney,
NSW 2007, Australia.

Managing Editor

Prof. Dr Xiao-Guang Yue
College Consultant of Rattanakosin
International College of Creative Entrepreneurship,
Rajamangala University of Technology Rattanakosin, Thailand

Associate Editors

Dr. Hoang Anh TUAN
Vice Dean, Faculty of Mechanical Engineering
Ho Chi Minh city University of Transport
Binh Thanh District, Ho Chi Minh city, Vietnam

Dr Hawa Hishamuddin
Center for Materials Engineering and Smart Manufacturing (MERCU)
Faculty of Engineering and Built Environment
Universiti Kebangsaan Malaysia (UKM)
Bangi, Selangor, Malaysia

Dr.Md. Mizanur Rahman
Department of Mechanical Engineering,
Faculty of Engineering
Universiti Malaysia Sabah,
Sabah, Malaysia

Editorial Team

Prof. Dr. Lim Ming Kim
Dean of College of Mechanical Engineering,
Chongqing University, Chongqing, China

Prof. Dr. Aleksandar Zunjic
Faculty of Mechanical engineering,
University of Belgrade, Belgrade, Serbia
President of the Ergonomics Society of Serbia

Dr. Prasenjit Chatterjee
Associate Professor and Head of the Department
Dept. of Mechanical Engineering
MCKV Institute of Engineering
West Bengal, India

Dr. Mohamad Zaki Hassan
UTM Razak School of Engineering & Advanced Technology
Level 7, Menara Razak, Universiti Teknologi Malaysia
Jalan Sultan Yahya Petra
54100 Kuala Lumpur, MALAYSIA

Assoc. Prof. Sallehuddin Muhamad
Deputy Director of Works
Office of Asset and Development
Universiti Teknologi Malaysia Kuala Lumpur
Jalan Sultan Yahya Petra
54100 Kuala Lumpur
Malaysia

Prof. Dr. Bale Reddy
Department of Automotive, Mechanical & Manufacturing Engineering
Faculty of Engineering & Applied Science
University of Ontario Institute of Technology
2000 Simcoe Street North
Oshawa, Ontario
Canada

Prof. Dr. Nandy Putra
Department of Mechanical Engineering
Faculty of Engineering
University of Indonesia

Dr. Manik Sharma
Assistant Professor
Department of Computer Science and Applications
DAV University, Jalandhar, India

Dr. Huda Falah Hasan Radi Alqaraghuli
College of Veterinary Medicine
University of Baghdad
Iraq

Assist. Prof.Dr. Firas A. Raheem
Head of Automation and Robotics Research Unit,
Department of Control and Systems Engineering,
University of Technology, Iraq

Prof. Dr Ramachandra
Department of Mechanical Engineering
School of Engineering
Presidency University,
Itgalpur, Rajanakunte,
Bengaluru India

Ir. Dr. Nuraini Abdul Aziz
Department of Mechanical and Manufacturing Engineering
Universiti Putra Malaysia

Dr. Siamak Hoseinzadeh
Department of Mechanical and Aeronautical Engineering
University of Pretoria

Prof. Dr. Talal Yusaf
School of Mechanical and Electrical Engineering
University of Southern Queensland
Australia

Prof. Dr. R. P. Mohanty
Fellow of Indian National Academy of Engineering
Siksha ‘O’ Anusandhan University, India

Dr. Chinmaya P. Padhy
Dept. of Mechanical Engineering,
School of Technology, GITAM University,
Hyderabad, India

Dr. Ümit AĞBULUT
Department of Mechanical and Manufacturing Engineering,
Faculty of Technology
Düzce University, Turkey.

Dr. Suat SARIDEMİR
Department of Mechanical and Manufacturing Engineering
Faculty of Technology
Düzce University
Düzce, Turkey.

Assoc. Prof.Dr Wan Ahmad Yusmawiza
(Adjunct Research Advisor, Nan Yang Academic of Science, Singapore)
Department of Industrial Engineering,
College of Engineering University of Hail,
Kingdom of Saudi Arabia

Asst. Prof. Dr. Oday Ibraheem Abdullah
Department of Energy Engineering
College of Engineering
University of Baghdad
Iraq, Hamburg University of Technology,
Institute G-2/Amp Denickestrasse 17 (Building L), Room 2047
21073 Hamburg
Germany

Prof Dr. Shashikantha Karinka
Dept. of Mechanical Engineering
NMAM Institute of Technology, NITTE-574110
Karkala Taluk, Udupi District, Karnataka State, India

Prof Dr. Ali MERDJI
Department of Mechanical Engineering,
Faculty of Science and Technology,
University Mustapha Stambouli of Mascara,
B.P. 305, W. Mascara, Algeria.

Dr Ali Amiri
Department of Mechanical Engineering
Shanghai Jiao Tong University
Shanghai, China

Prof. Dr. Ainur Zhumadillayeva
Faculty of Information Technology
L.N.Gumilyov Eurasian National University
Astana, Kazakhstan

Prof. Dr. Hao Wu
College of Urban and Environmental Sciences
Central China Normal University, China

Dr. Sina H Yousefi
Virginia Commonwealth University

Prof. Dr. Anh Tuan Le
Hanoi University of Science and Technology
Hanoi city, Vietnam

Abstracting and Indexing
The articles published in Journal of Mechanical Engineering Research and Developments are abstracted and indexed in SCOPUS, CNKI, Crossref, Google Scholar.

 

Article Processing Charges
Author whose paper is accepted for publication in Journal of Mechanical Engineering Reserach and Developments Technological is subjected to pay 300 USD per article up to 15 pages. In order to cover the publishing maintaining, all papers would be supported as Open Access.

For some reasonable cases, we can waive the publication fee of an author.


Copyright © 2020 Plemillan Publishing Corporation. All rights reserved.