Jmerd

Design and Analysis of a Flexible Biped Wall-climbing Bot

Views: | Download:
Author(s): Kamala Kannan S R & R. Ambigai
Source: Kamala Kannan S R & R. Ambigai, Design and Analysis of a Flexible Biped Wall-climbing Bot, Journal of Mechanical Engineering Research and Developments, vol. 40, no. 2, pp. 357-364, 2017. 
 
Document Type: Research Article

View Fulltext: PDF
 
Abstract: Model and analysis of a wall climbing robot based on the link and suction mechanism. Many wall climbing robots are designed and shaped for few decades, but still, the underlying problems for the wall climbing are faced by the designers. Wall-climbing robots consist of a two mechanism, one is the link, and other is a suction mechanism. In link mechanism there are two joints I-joint and T-joint, Where I-joint can rotate about its axis, T-joint can rotate about 180, Both the joints give the ability to rotate in the clockwise and anticlockwise direction, which helps the robot to have a good transient mechanism between the horizontal wall to vertical wall. Based on these link mechanisms static and dynamic analysis were carried out to find the stress and strain developed in the joint during the motion. To achieve the suction mechanism, suction cups placed on the suction base in a triangle shape, and three suction cups are employed. Based on the weight of the robot load distribution is calculated. Both the static and dynamic analysis is performed using the software Ansys R15 and Inventry15.

Keywords: Ansys; Wall climbing robot; Static analysis; Dynamic analysis; Simulation.